How to Make a Fixed Home Theater Projector Screen

If you are planning to setup a home theater system, it is extremely important to remember that the angle screen is an equally important component of the entire ideas to certify an enjoyable viewing experience. It is, therefore, recommended that you do a proper explore on the various ready options before finalizing a angle screen for your home theater system.

How to Make a Fixed Home Theater Projector Screen

How to Make a Fixed Home Theater Projector Screen

---

How to Make a Fixed Home Theater Projector Screen

How to Make a Fixed Home Theater Projector Screen

There are separate types of projector screens ready in the market, but, the one that will work for your home theater ideas depends on some aspects such as the projector, the amount of Light in the room, distance in the middle of projector and the screen as well as the viewing angle.

Fixed angle screens

Permanent or fixed angle screens are commonly seen in cinema halls or homes where a room has been designated as a dedicated home theater room, which means that unlike pull-down screens, the fixed projector screens cannot be retracted. However, fixed projector screens have the benefit of giving out a clearer picture than some of the other commonly used angle screens.

Building a fixed projector screen

Although the fixed projector screens are costly, you can comfortably make one of these at home for the same viewing taste and save tons of money. Manufacture a fixed projector screen at home is not as difficult as you might think. All you need is the right equipment and a puny bit of knowledge on using definite basic tools.

Building the Frame: The first step in designing your own fixed projector screen is to make a frame that will sustain the fixed projector screen's fabric.

Although plywood and wooden boards are good base material for a frame, definite wood types such as pine should be avoided owing to their excessive flexibility.

Take extra care and get all your measurements right to avoid any involved last moment modifications. It is advisable to enlarge the corners with hard wood and reinforce these with a lot of screws to make sure it fits properly. If all these steps are taken care of properly, you should have a frame that can rival any of the best.

Building the screen: Once the frame is ready, the next thing to do is to build the actual screen that will be attached to the frame.

The screen can be created using a fabric called curtain blackout cloth, which can be found at any of the fabric stores. This type of cloth has one side similar to plastic while the other side resembles quarterly fabric.

The material should always be bought a puny more than what is truly needed to leave room for corrections. Another thing you will need is a durable stapler that will be used to fasten the screen onto the wooden frame. Hold the cloth tightly over the wooden frame and lock it with the help of a few staples.

After the screen has been stapled at all corners and the excess cloth cut from the curves, your fixed projector screen should be ready to put up on the wall.

How to Make a Fixed Home Theater Projector Screen

My Links : Rechargeable Batteries | Green Battery Chargers | Barney Halloween Party Drinking Water Pump Manual Acai Berry Oprah